PEER has just published Report No. 2017/06 titled: “Guidelines for Performance-Based Seismic Design of Tall Buildings,” Version 2.03, prepared by a TBI Working Group led by co-chairs Ron Hamburger and Jack Moehle: Jack Baker, Jonathan Bray, C.B. Crouse, Greg Deierlein, John Hooper, Marshall Lew, Joe Maffei, Stephen Mahin, James Malley, Farzad Naeim, Jonathan Stewart, John Wallace.
This report was sponsored by the Charles Pankow Foundation with additional financial and/or in-kind support provided by ACI Foundation (Concrete Research Council), American Institute of Steel Construction, Federal Emergency Management Agency, Structural Engineering Institute of ASCE (SEI), and the Structural Engineers Association of California.
These Seismic Design Guidelines for Tall Buildings present a recommended alternative to the prescriptive procedures for seismic design of buildings contained in the ASCE 7 standard and the International Building Code (IBC). The intended audience includes structural engineers and building officials engaged in seismic design and review of tall buildings. Properly executed, these Guidelines are intended to result in buildings that are capable of reliably achieving the seismic performance objectives intended by ASCE 7, and in some aspects, and where specifically noted, somewhat superior performance to such objectives. Individual users may adapt and modify these Guidelines to serve as the basis for designs intended to achieve higher seismic performance objectives than specifically intended herein.
The Pacific Earthquake Engineering Research Center published a first edition of these Guidelines in 2010 in response to the growing use of alternative performance-based approaches for seismic design of tall buildings. Major innovations introduced in that volume included: use of Service-Level Earthquake (SLE) shaking to evaluate building response to frequent earthquakes coupled with a specific collapse-resistance evaluation for Maximum Considered Earthquake (MCER) shaking, use of nonlinear dynamic analysis; explicit evaluation of global, system-based performance criteria in addition to individual element or member-based criteria; introduction of the concept of critical and non-critical elements; and explicit evaluation of cladding adequacy for MCER demands.
In the time since the publication of the 2010 Guidelines, the profession has gained substantial experience in application of these techniques to design of buildings around the world, and, in particular, the western United States. Also, the ASCE 7 standard has been amended substantially, in no small part based on influence from the first edition of this document. Additionally, significant advances have been made in nonlinear analytical capability and in defining ground motions for use in nonlinear seismic analysis. Initially, buildings designed using performance-based procedures were assigned to Risk Category II; these buildings were structurally regular and typically utilized concrete core wall systems for lateral resistance. Individual project development teams have extended the use of performance-based seismic design of tall buildings to encompass other structural systems, building complexes that include irregular structures and multiple towers on a single podium, and numerous structures assigned to higher Risk Categories. This second edition addresses lessons learned in application of the first edition on many projects and the conditions, knowledge, and state-of-practice that presently exist.
These Guidelines include the seismic design of structural elements normally assigned as part of the seismic-force-resisting system as well as structural elements whose primary function is to support gravity loads. Except for exterior cladding, design of nonstructural components is not specifically included within the scope of these Guidelines. Design for nonstructural systems should conform to the applicable requirements of the building code or other suitable alternatives that consider the unique response characteristics of tall buildings.
October 9, 2017: V2.03 released to correct Equations (6-1) and (6-2) and to move the definition for the “B” term to Page 9-9.
September 6, 2017: V2.02 released to incorporate typographical errors.
May 23, 2017: Electronic links in article updated to incorporate V2.01, released to incorporate hyperlinks, correct Equations (6.2) and (6.4) and minor typographical errors.